Install Docker Engine on Fedora

Estimated reading time: 10 minutes

To get started with Docker Engine on Fedora, make sure you meet the prerequisites, then install Docker.

Prerequisites

OS requirements

To install Docker Engine, you need the 64-bit version of one of these Fedora versions:

Fedora 30
Fedora 31

Uninstall old versions

Older versions of Docker were called docker or docker-engine. If these are installed, uninstall them, along with associated dependencies.

$ sudo dnf remove docker \
                  docker-client \
                  docker-client-latest \
                  docker-common \
                  docker-latest \
                  docker-latest-logrotate \
                  docker-logrotate \
                  docker-selinux \
                  docker-engine-selinux \
                  docker-engine

It’s OK if dnf reports that none of these packages are installed.

The contents of /var/lib/docker/, including images, containers, volumes, and networks, are preserved. The Docker Engine package is now called docker-ce.

Installation methods

You can install Docker Engine in different ways, depending on your needs:

Most users set up Docker’s repositories and install from them, for ease of installation and upgrade tasks. This is the recommended approach.
Some users download the RPM package and install it manually and manage upgrades completely manually. This is useful in situations such as installing Docker on air-gapped systems with no access to the internet.
In testing and development environments, some users choose to use automated convenience scripts to install Docker.

Install using the repository

Before you install Docker Engine for the first time on a new host machine, you need to set up the Docker repository. Afterward, you can install and update Docker from the repository.

Set up the repository

Install the dnf-plugins-core package (which provides the commands to manage your DNF repositories) and set up the stable repository.

$ sudo dnf -y install dnf-plugins-core

$ sudo dnf config-manager \
    --add-repo \
    https://download.docker.com/linux/fedora/docker-ce.repo

Optional: Enable the nightly or test repositories.

These repositories are included in the docker.repo file above but are disabled by default. You can enable them alongside the stable repository. The following command enables the nightly repository.
$ sudo dnf config-manager --set-enabled docker-ce-nightly
To enable the test channel, run the following command:
$ sudo dnf config-manager --set-enabled docker-ce-test
You can disable the nightly or test repository by running the dnf config-manager command with the --set-disabled flag. To re-enable it, use the --set-enabled flag. The following command disables the nightly repository.
$ sudo dnf config-manager --set-disabled docker-ce-nightly
Learn about nightly and test channels.

Install Docker Engine

Install the latest version of Docker Engine and containerd, or go to the next step to install a specific version:
```
$ sudo dnf install docker-ce docker-ce-cli containerd.io
```
If prompted to accept the GPG key, verify that the fingerprint matches 060A 61C5 1B55 8A7F 742B 77AA C52F EB6B 621E 9F35, and if so, accept it.

Got multiple Docker repositories?

If you have multiple Docker repositories enabled, installing or updating without specifying a version in the dnf install or dnf update command always installs the highest possible version, which may not be appropriate for your stability needs.

Docker is installed but not started. The docker group is created, but no users are added to the group.
To install a specific version of Docker Engine, list the available versions in the repo, then select and install:

a. List and sort the versions available in your repo. This example sorts results by version number, highest to lowest, and is truncated:
```
$ dnf list docker-ce  --showduplicates | sort -r

docker-ce.x86_64  3:18.09.1-3.fc28                 docker-ce-stable
docker-ce.x86_64  3:18.09.0-3.fc28                 docker-ce-stable
docker-ce.x86_64  18.06.1.ce-3.fc28                docker-ce-stable
docker-ce.x86_64  18.06.0.ce-3.fc28                docker-ce-stable
```
The list returned depends on which repositories are enabled, and is specific to your version of Fedora (indicated by the .fc28 suffix in this example).

b. Install a specific version by its fully qualified package name, which is the package name (docker-ce) plus the version string (2nd column) up to the first hyphen, separated by a hyphen (-), for example, docker-ce-3:18.09.1.
```
$ sudo dnf -y install docker-ce-<VERSION_STRING> docker-ce-cli-<VERSION_STRING> containerd.io
```
Docker is installed but not started. The docker group is created, but no users are added to the group.
Cgroups Exception: For Fedora 31 and higher, you need to enable the backward compatibility for Cgroups.
```
$ sudo grubby --update-kernel=ALL --args="systemd.unified_cgroup_hierarchy=0"
```
After running the command, you must reboot for the changes to take effect.
Start Docker.
```
$ sudo systemctl start docker
```
Verify that Docker Engine is installed correctly by running the hello-world image.
```
$ sudo docker run hello-world
```
This command downloads a test image and runs it in a container. When the container runs, it prints an informational message and exits.

Docker Engine is installed and running. You need to use sudo to run Docker commands. Continue to Linux postinstall to allow non-privileged users to run Docker commands and for other optional configuration steps.

Upgrade Docker Engine

To upgrade Docker Engine, follow the installation instructions, choosing the new version you want to install.

Install from a package

If you cannot use Docker’s repository to install Docker, you can download the .rpm file for your release and install it manually. You need to download a new file each time you want to upgrade Docker Engine.

Go to https://download.docker.com/linux/fedora/ and choose your version of Fedora. Then browse to x86_64/stable/Packages/ and download the .rpm file for the Docker version you want to install.

Note: To install a nightly or test (pre-release) package, change the word stable in the above URL to nightly or test. Learn about nightly and test channels.
Install Docker Engine, changing the path below to the path where you downloaded the Docker package.
```
$ sudo dnf -y install /path/to/package.rpm
```
Docker is installed but not started. The docker group is created, but no users are added to the group.
Start Docker.
```
$ sudo systemctl start docker
```
Verify that Docker Engine is installed correctly by running the hello-world image.
```
$ sudo docker run hello-world
```
This command downloads a test image and runs it in a container. When the container runs, it prints an informational message and exits.

Docker Engine is installed and running. You need to use sudo to run Docker commands. Continue to Post-installation steps for Linux to allow non-privileged users to run Docker commands and for other optional configuration steps.

Upgrade Docker Engine

To upgrade Docker Engine, download the newer package file and repeat the installation procedure, using dnf -y upgrade instead of dnf -y install, and pointing to the new file.

Install using the convenience script

Docker provides convenience scripts at get.docker.com and test.docker.com for installing edge and testing versions of Docker Engine - Community into development environments quickly and non-interactively. The source code for the scripts is in the docker-install repository. Using these scripts is not recommended for production environments, and you should understand the potential risks before you use them:

The scripts require root or sudo privileges to run. Therefore, you should carefully examine and audit the scripts before running them.
The scripts attempt to detect your Linux distribution and version and configure your package management system for you. In addition, the scripts do not allow you to customize any installation parameters. This may lead to an unsupported configuration, either from Docker’s point of view or from your own organization’s guidelines and standards.
The scripts install all dependencies and recommendations of the package manager without asking for confirmation. This may install a large number of packages, depending on the current configuration of your host machine.
The script does not provide options to specify which version of Docker to install, and installs the latest version that is released in the “edge” channel.
Do not use the convenience script if Docker has already been installed on the host machine using another mechanism.

This example uses the script at get.docker.com to install the latest release of Docker Engine - Community on Linux. To install the latest testing version, use test.docker.com instead. In each of the commands below, replace each occurrence of get with test.

Warning:

Always examine scripts downloaded from the internet before running them locally.

$ curl -fsSL https://get.docker.com -o get-docker.sh
$ sudo sh get-docker.sh

<output truncated>

If you would like to use Docker as a non-root user, you should now consider adding your user to the “docker” group with something like:

  sudo usermod -aG docker your-user

Remember to log out and back in for this to take effect!

Warning:

Adding a user to the “docker” group grants them the ability to run containers which can be used to obtain root privileges on the Docker host. Refer to Docker Daemon Attack Surface for more information.

Docker Engine - Community is installed. It starts automatically on DEB-based distributions. On RPM-based distributions, you need to start it manually using the appropriate systemctl or service command. As the message indicates, non-root users can’t run Docker commands by default.

Note:

To install Docker without root privileges, see Run the Docker daemon as a non-root user (Rootless mode).

Rootless mode is currently available as an experimental feature.

Upgrade Docker after using the convenience script

If you installed Docker using the convenience script, you should upgrade Docker using your package manager directly. There is no advantage to re-running the convenience script, and it can cause issues if it attempts to re-add repositories which have already been added to the host machine.

Uninstall Docker Engine

Uninstall the Docker Engine, CLI, and Containerd packages:

$ sudo dnf remove docker-ce docker-ce-cli containerd.io

Images, containers, volumes, or customized configuration files on your host are not automatically removed. To delete all images, containers, and volumes:
```
$ sudo rm -rf /var/lib/docker
```

You must delete any edited configuration files manually.

Next steps

Continue to Post-installation steps for Linux.
Review the topics in Develop with Docker to learn how to build new applications using Docker.

requirements, apt, installation, fedora, rpm, install, uninstall, upgrade, update